# Council Decision (EU) 2015/1198 of 13 July 2015 on the position to be adopted on behalf of the European Union within the Joint Committee established by the Agreement in the form of an Exchange of Letters between the European Economic Community and the Principality of Andorra as regards the replacement of the Appendix to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation, Appendix ANNEX III SPECIMENS OF MOVEMENT CERTIFICATE EUR.1 AND APPLICATION FOR A MOVEMENT CERTIFICATE EUR.1 Printing instructions 1. Each form shall measure 210 × 297 mm; a tolerance of up to minus 5 mm or plus 8 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m2. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye. 2. The competent authorities of the Parties may reserve the right to print the forms themselves or may have them printed by approved printers. In the latter case, each form must include a reference to such approval. Each form must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified. NOTES 1. The certificate must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the customs authorities of the issuing country or territory. 2. No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible. 3. Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified. DECLARATION BY THE EXPORTER I, the undersigned, exporter of the goods described overleaf, DECLARE that the goods meet the conditions required for the issue of the attached certificate; SPECIFY as follows the circumstances which have enabled these goods to meet the above conditions: … … … … SUBMIT the following supporting documents: … … … … UNDERTAKE to submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities; REQUEST the issue of the attached certificate for these goods. Place …, Date … … (Signature) --- Source: https://www.legislation.gov.uk/eudn/2015/1198/schedule/ANNEX/appendix/ANNEX III (the official version) Page: https://openlegislation.uk/eu-decision-2015-1198/schedule-ANNEX/appendix-ANNEX III Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.